Cobra Dane

Cobra Dane

Eareckson Air Station in Alaska
  • Date: March, 2019
  • Project Type: Replica Models

 

About this Project

 

Not all models need be complex to still present an accurate representation of the real thing. Archetype3D was hired to build two replica models of the Cobra Dane radar facility in Alaska. We used only available images to design and build the models.

 

 

The COBRA DANE radar is a single faced ground-based, L-band phased-array radar located in northern U.S. Indio-Pacific Command (USINDOPACOM) area of operations and operated by the U.S. Air Force.

The primary mission of COBRA DANE is to collect radar metric and signature data on foreign ballistic missile events during exo­-atmospheric and early endo-atmospheric portions of flight and on selected space launches in early orbit in support of treaty monitoring, force modernization, and missile defense. Additional missions include collecting space surveillance data on new foreign launches and both known (cataloged) and unknown (uncatalogued) satellites in low-earth orbit for the Space Domain Awareness (SDA) Operations Cell.  

Related Projects

  • Equipment Models of Cooling Towers
  • Data Center
  • Model helps designers make changes
    Another Scale Model for Lockheed Martin | Archetype 3D Scale Models
  • Vortisand

Let's Build Something

Let one of our talented model makers discuss your project with you. You don’t need to have your plans finalized. We pride ourselves in being able to work with the customer from start to finish in the design and build process.

 

info@archetype3d.com
3000 Airport Drive Erie Colorado Unit 201A 80516
+1 (303) 449-0878

MagTraC Scientific Drilling

MagTraC, Scientific Drilling

Trade Show Demonstration Model

 

About this Project

Scientific Drilling needed to demonstrate their complex oil drilling system. Archetype3D was hired to design and build a display model to demonstrate this system. The challenge was how to represent radio waves travelling from an underground drill bit to a receiving tower. We were able to take basic drawings from engineers and turn the vision into a beautiful trade show model.

The drilling system system sends signals into the surrounding ground to determine if there is another pipe in the way. The drill bit can then be redirected around the obstacle. To show this and other features of their system Archetype3D designed a not-to-scale  demonstration model to show off these features. This circular model has events shown on all sides. They include the by-pass system and ocean drilling systems. Earth striations will represented with numerous drill systems travelling through. The lighting was created to show movement through the earth and signals being sent to a central tower.

Each element of this model was carefully designed and approved by the client so that the sales team could use it to sell at least five different product types within the same model. The model has traveled to numerous trade shows throughout the US and when not travelling it sits in the Scientific Drilling lobby to attract visitors and explain their systems to local clients.

Making complex systems easy to understand is one of the best uses for a physical model at a trade show. Your model should attract customers from across the room and once you have them at your booth, the model needs to clearly demonstrate you products so that they can relate to the model and your product quickly and understand why they should buy right now. Allow your sales team a easy way to show off your product, have your demonstration model built by Archetype3D.

Related Projects

  • Equipment Models of Cooling Towers
  • Data Center
  • Model helps designers make changes
    Another Scale Model for Lockheed Martin | Archetype 3D Scale Models
  • Vortisand

Let's Build Something

Let one of our talented model makers discuss your project with you. You don’t need to have your plans finalized. We pride ourselves in being able to work with the customer from start to finish in the design and build process.

 

info@archetype3d.com
3000 Airport Drive Erie Colorado Unit 201A 80516
+1 (303) 449-0878

999

999 17th Street

Downtown Denver 9 Story Office Building

Details

Model: Size 20″ X 24″, Scale 1″ = 8′

Site Location:

 
 
 
 
 
 

Project Info

999 17th Street is a 9-story office building that contains 93,000 square feet of office space, designed by the Denver-based architecture firm Davis Partnership Architects. This building is located at the corner of 17th Street and Curtis Street in Downtown Denver. The glass facade on the 17th Street side of 999 17th Street is very unique and creates a one-of-a-kind visual experience for onlookers, designed to include glass segments that are angled in 6 different directions. 

Shea Properties brought on Archtype3d to build a model in the early construction phase in order to present to commercial real estate brokers.

 

Client:  Shea Properties

Project Type: Commercial Office

Lead Model Designer: Michael Steinkoenig

Let’s Build Something

Building 3D scale models since 1984. Our talented staff of model builders is ready to assist you in the design and build of your project.

Sunpower Solar

Sunpower Solar

Solar Powered Parking Structure

  • Date: Decembre, 2018
  • Client: Sunpower Solar
  • Project Type: Trade Show Modell
  • Lead Model Designer: Bryan Beard

 

About this Project

Archetype3D designed and build two scale solar poser parking structure models for Sunpower Corporation. Each was designed to be assembled/disassembled on-site to allow for ease and security in travel to trade shows.

The models represented an accurate depiction of the real-world materials, using a  combination of 3d printing, laser cutting/etching and painting to produce the desired effects.

Details include a wood-trimmed base, detailed parking lot and lines, roof support structure: an inverter box, highly detailed solar panels, and LED lighting.

  • Model Size: 30″ x 20″ x 20″

  • Model Scale: 1:24

  • Site Location: Richmond, California

Related Projects

[
  • Equipment Models of Cooling Towers
  • Data Center
  • Model helps designers make changes
    Another Scale Model for Lockheed Martin | Archetype 3D Scale Models
  • Vortisand

Let's Build Something

Let one of our talented model makers discuss your project with you. You don’t need to have your plans finalized. We pride ourselves in being able to work with the customer from start to finish in the design and build process.

 

info@archetype3d.com
3000 Airport Drive Erie Colorado Unit 201A 80516
+1 (303) 449-0878

CWMF

Portable Silo Plant Equipment 

  • Client: CWMF Corporation
  • Project Type: Sales and Marketing Demonstration Model
  • Lead Model Designer: Bryan Beard

About this Project

For over 30 years, CWMF Corporation has been offering portable and stationary asphalt plant equipment, parts, and service. They help customers optimize overall plant performance and run at peak efficiency. 

CWMF Corporation brought on Archtype3d to build a traveling trade show model to demonstrate the basic functions of their one of the portable silo system.

  • Model Scale: 1:20

     

  • Model Size: 3.5’L x 1.0’W x 2.5’H 

Related Projects

  • Establishing Public Buy-in
    Make Room For The Ambulances
  • Wind Turbine Model
    Wind Turbine Model
  • Architectural Scale Models for Today
    Architectural Scale Models for Today
  • Establishing Public Buy-in
    Major Redesign Of An Active Building

Let's Build Something

Let one of our talented model makers discuss your project with you. You don’t need to have your plans finalized. We pride ourselves in being able to work with the customer from start to finish in the design and build process.

 

info@archetype3d.com
3000 Airport Drive Erie Colorado Unit 201A 80516
+1 (303) 449-0878

Vortisand

Vortisand® – Evoqua Water Technologies

Industrial Water Filtration System Trade Show Model

Model Scale: 1:12

Model Size: 3’L x 1.5’W x 2’H

 

 
 
 
 
 
 
 
 
 
 

Project Info

Vortisand® systems are synonymous with water filtration, serving the industrial water markets since 1986. The award-winning Vortisand is a High Efficiency Microsand Filtration System. It is a high capacity media filter that combines cross-flow dynamics with microsand media to achieve submicron filtration performance. This technology allows the unit to operate at filtration rates of up to 5 times greater than those of traditional media filters while filtering 10-50 times finer.

Vortisand® brought on Archtype3d to build a traveling trade show model to demonstrate the basic functions of their industrial filtrations system.

Client:  Vortisand®

Project Type: Marketing and Trade Show

Lead Model Designer: Michael Steinkoenig

Contact Us